ASH2 & AD: Finished 02.19.2016

ASH 2, brown, shown with piggy back sheath. These sheaths are made from heavy 10oz American cow and loaded with features. They have fully hand bone polished and dyed edges and are finished in a matte top coat inside and out. - The dangler option can be added or removed in about 10 seconds for wearing high & tight, the steel loop comes off with the dangler and is not left on the knife. - The belt loop is released with Mil-Spec US made pull-dot fasteners which release in opposite directions to minimize risk of a snag in the field from releasing both of them. - The lower edge of the sheath has holes punched to accept any accessory that works with a Tek-Lok. Three sets of Chicago screws are included for use when nothing is attached and sheaths ship with a pair of 3/4" Chicago screws for mounting an accessory. Also includes an assortment of rubber & nylon spacers for a variety of mounting options. - The retention strap is a pin lock that inserts into the front scale mounting hole and also closes with a pull-dot snap. With the pin in place it is impossible for the knife to come out. Once the strap is released it opens to the front to avoid being cut when drawing or inserting the knife in the sheath. It is also removable for times when less retention is desired. - There is a tab on the back side of the sheath for installing a leg strap - Chicago screw reinforcements are on either side of the sheath opening. - I am planning to make fire steel holders from Kydex that will attach to the Tek-Lok mount. I won’t have them ready for a bit, but will ship one to buyers no charge when completed. Price: $125 shipped (5 available, 2 tan, 2 brown, 1 black)
ASH 2, brown, shown with piggy back sheath.
These sheaths are made from heavy 10oz American cow and loaded with features. They have fully hand bone polished and dyed edges and are finished in a matte top coat inside and out.
– The dangler option can be added or removed in about 10 seconds for wearing high & tight, the steel loop comes off with the dangler and is not left on the knife.
– The belt loop is released with Mil-Spec US made pull-dot fasteners which release in opposite directions to minimize risk of a snag in the field from releasing both of them.
– The lower edge of the sheath has holes punched to accept any accessory that works with a Tek-Lok. Three sets of Chicago screws are included for use when nothing is attached and sheaths ship with a pair of 3/4″ Chicago screws for mounting an accessory. Also includes an assortment of rubber & nylon spacers for a variety of mounting options.
– The retention strap is a pin lock that inserts into the front scale mounting hole and also closes with a pull-dot snap. With the pin in place it is impossible for the knife to come out. Once the strap is released it opens to the front to avoid being cut when drawing or inserting the knife in the sheath. It is also removable for times when less retention is desired.
– There is a tab on the back side of the sheath for installing a leg strap
– Chicago screw reinforcements are on either side of the sheath opening.
– I am planning to make fire steel holders from Kydex that will attach to the Tek-Lok mount. I won’t have them ready for a bit, but will ship one to buyers no charge when completed.
Price: $125 shipped
(5 available, 2 tan, 2 brown, 1 black)
ASH 2, tan.
ASH 2, tan.
ASH 2, tan (upper), brown (lower).
ASH 2, tan (upper), brown (lower).
ASH 2, tan (upper), black (lower).
ASH 2, tan (upper), black (lower).
ASH 2, backs, brown (top), tan (middle), black (bottom).
ASH 2, backs, brown (top), tan (middle), black (bottom).
ASH 2 Pin Lock, locks deeply in to front scale tube.
ASH 2 Pin Lock, locks deeply in to front scale tube.

 

Active Duty, Tan. This sheath is similar to what I usually make but is designed to be extra heavy duty based on a customer request. I like it so I made a few extra's. The welt around the blade is about double the width of my normal welt, which provides extra protection and rigidity in the sheath. The is an overbuilt sheath for an overbuilt tank of a small knife. $55 shipped.
Active Duty, Tan. This sheath is similar to what I usually make but is designed to be extra heavy duty based on a customer request. I like it so I made a few extra’s. The welt around the blade is about double the width of my normal welt, which provides extra protection and rigidity in the sheath. The is an overbuilt sheath for an overbuilt tank of a small knife. $55 shipped.
Active Duty, tan.
Active Duty, tan.
Active Duty, tan, back.
Active Duty, tan, back.

Leave a Reply